Sony TA-2000F User Manual

Detailed technical specifications for the TA-2000F unit.

Describes function and operation of all stages and controls.

Diagram illustrating the signal flow and connections within the unit.

Illustrates signal levels at various points in the audio path.

Lists the necessary tools for performing disassembly and replacement.

Procedures for removing the top cover and front panel of the unit.

Steps to remove the front subchassis assembly.

General procedure for removing PC boards from the chassis.

Steps for replacing various controls and switches on the unit.

Diagram showing the layout of major PCB boards within the chassis.

Lists the required test equipment for calibration and adjustment.

Procedures for checking and adjusting power supply voltages.

Measures input sensitivity for various inputs.

Measures the harmonic distortion of the unit.

Measures the frequency response across various inputs.

Checks the response of the bass and treble tone controls.

Checks the response of the low and high cut filters.

Measures the channel crosstalk performance of the unit.

Shows component layout on the PHONO-1 Equalizer Amplifier/Head Amplifier board.

Shows component layout on the MIC Amplifier/PHONO-2 Equalizer Amplifier board.

Shows component layout on the Flat Amplifier-1/Flat Amplifier-2 board.

Shows component layout on the Meter Amplifier/Headphone Amplifier board.

Shows component layout on the Muting/Power Supply board.

Shows component layout on the REC OUT Buffer/Filter board.

Shows component layout on the OUTPUT LEVEL Changeover Switch board.

Introduction to the changes and corrections detailed in the supplement.

Details on modifications made to the TA-2000F.

Information on transistor changes in the amplifier section and interchangeability.

Correction for an illustration regarding Idss rank in the main service manual.