54
PVM-X2400/X1800
Unit: mm (inches)
Make sure to tighten the screws using the
screwdriver which conforms to the supplied
screws.
When using an electric screwdriver, set the
torque setting as follows.
For M4 screws: approximately 1.2 N·m [12
kgf·cm]
* Length of M4 screws (side, rear)
Monitor cabinet
Attached object
6 (
1
/
4
) to 8 (
11
/
32
)
M4 screw
To Next Page
Loading...
