Sony TRINITRON KV-16WT1 - Screen Format Adjustment; Sleep Timer Function; Manual Channel Presetting

30
en
eee)
Changing
of
the
Screen
Format
You have the possibility to change the aspect ratio for the TV display
for wide screen effects.
1 Press MENU @®.
2 Press repeatedly the blue ® button to select Zoom 1.
3 Press the red © or yellow ® button repeatedly to select one of the following
effects:
Zoom 1: imitation of 16:9 for 4:3 broadcasts.
Zoom 2: imitation of 16:9 for movies broadcast in cinemascopic format.
Zoom 2t: when using Zoom 2 mode, part of the top and bottom of the picture are
cut off. Using Zoom 2t you can move the picture upwards in order to
see the cut-off part of the screen (e.g. to read subtitles).
Zoom 3: for 16:9 broadcast. «
43 for normal 4:3 format.
4 Press MENU @® to return to normal TV screen.
Note: With a RGB source the format 4:3 is not available.
Using the Sleep Timer
The TV may be set to switch to the standby mode automatically after a length of time
chosen by you. You may set the time in 30 minutes steps up to 4 hours.
1 Press MENU ®.
2 Press green @ or blue ® button to select ¢')
3 Press red © or yellow ® button to set time delay.
0.00 (OFF) 0.30 1.00 1.30.... 4.00
4 Press MENU @® to return to normal TV screen.
When watching TV, press © @ to display time remaining.
Presetting Channels
Manually
Up to 60 programme positions are
available for presetting channels.
1
2
Press MENU ®.
Press green @ or blue ® button to select > and
press yellow (OK) ® button.
Select programme number using PROGR +/- ® & or
the number buttons @.
Press green @ or blue @ button to select tuning bar
and press red Oor yellow® button to start channel search.
When a channel is found the tuning bar stops moving and
you see the picture.
If you want to store, press green @ or blue ® button to
select O and press yellow (OK) ® button. If you don’t want,
press red @ or yellow @ button to continue search.
Repeat steps 3 to 5 for all other channels.
Press MENU @ to return to normal TV screen.
31