Sony TRINITRON KV-16WT1 - Test Mode 2 Functions

4-2. TEST MODE 2:
KV-16WT1
TT -- Mode is available by pressing the Test button twice, O.S.D 'TT --' appears. The functions described below are available
by pressing two digits. To release the 'TT --' mode, press 0 twice, press 'TEST' , press 'TV' or switch the TV into Stand-by mode.
Shipping condition (Analog values are RESET to factory
setting, Prog 1 is selected, TT--mode switched off,
= 35%).
11
[12 [Teens Lele Eanoamhe)
[12 [sees Oss Even etorRenineracsiatt
Read factory setting from ROM to NVM - Reads Volume,
Brightness, Picture, Hue, Sharpness and Colour values
from ROM to the actual used values (Last Power
Memory).
(6 [Newnes
17 Enable / Disable Sharpness Operation.
Enable / Disable Teletext Operation.
i en omen
No function.
Sub Picture.
Sub Brightness.
24 Destination System BG/L.
Destination Systems BG/L.
Destination Systems I.
42 |Seanviteaiyewaanini
ON
| 50 | No function.
Note : For Test Modes 41 - 50, it is necessary to ensure that
the TV is set to Prog 59.
—24—