Sony TRINITRON KV-29C5D - Fine-Tuning Channels; Using Optional Equipment

Ol
Additional TV Features
Fine-Tuning Channels
If a channel is slightly off tune, you can use this fine tune procedure to obtain a better
picture reception.
1 With the channel you wish to fine-tune on the
screen, press the MENU button on the remote
control, The menu display appears on the TV
screen.
Os|
® ®
2 Press the blue button on the remote control to
select the ’ symbol on the TV screen then press
the yellow button.
3 Press the blue button to select the «+ symbol on
the TV screen then press the red or yellow button
to adjust the tuning.
eOOCO 0s
OOOO
4 Press the blue button to select the symbol on the
TV screen then press the yellow button to store.
5 Press the MENU button to remove the menu from
the TV screen.
TE
CE pe
CH 05 muuuiuinyt-----
MR
er ‘on
Cag
85
| 15
Optional Connections
Using Optional Equipment
You can connect optional audio or video equipment to your TV, such asa VCR, a
camcorder or video games as shown.
Front of TV
Select and View the Input Signal
1 Connect your equipment to the designated TV socket.
2 Press the €) button repeatedly on your remote control until the
correct input symbol appears on the TV screen.
Symbol Input signals
a1 ¢ Audio/video input signal through the Euro AV
connector
eo) ¢ RGB input signal through the Euro AV
connector
2 ¢ Audio/video input signal through the Euro AV
connector J or the phono sockets [qj and BJ
r=) * S video input signal through the socket EJ.
3 Switch on the connected equipment.
4 To return to normal TV picture, press the ©) button on the remote
control.
S -VHS/Hi8
camcorder
Note: To avoid picture distortion, do not connect equipment to the
i @ or BH connectors at the same time.
Rear of TV
Additional Information
Connecting a VCR
We recommend you tune in the VCR signal to TV programme number °0'
using the ‘Manually Tuning in the TV' section of this instruction manual.
Connecting Headphones
Plug in your headphones to the socket J on the front of the TV set.
Connecting Decoders
Plug in decoders to the socket [J on the rear of the TV.
Connecting to External Audio Equipment
Plug in your Hi-Fi equipment to the J sockets on the rear of the TV if
you wish to amplify the audio output from the TV.