Sony TRINITRON KV-29C5D - Page 18

KV-25C5/29C5
(2) Operation of the BMC (Hexapole) magnet.
RG B R G B
o—O———o
=>
0o—_0—_0
<=
o——0—0
/
. :
j
:
R G B R G B R B
o_o o——o——_o Ro
: The respective dot position resulting from moving each
magnet interact, so be sure to perform adjustment whilst
tracking.
Use the H.STAT VR to adjust the Red, Green and Blue dots
so that they coincide at the centre of the screen
[by moving the dots in the horizontal direction].
BMC (Hexapole)
(3) Dynamic convergence adjustment.
Preparation:
: he ; : 2. Remove the deflection yolk spacer.
°
Before
starting
this
adjustment,
adjust
the
horizontal
and
3.
Move
the
deflection
yolk
as
indicated
in
the
figure
below
and
vertical static convergence. optimize the convergence.
1. Slightly loosen the deflection yolk screws. 4. Tighten the deflection yolk screws.
5. Re-install the deflection yolk spacer.
B GRRGB
18