20
Printing
Operation
• Do not allow more than 10 printouts to accumulate.
Leaving too many printouts in the output tray could
cause a paper jam.
When printing is disabled
Printing is disabled when the ribbon door panel is open or
the ALARM indicator is lit.
For details, see “Explanation of Indicators” on page 26.
If the paper or ink ribbon runs out while printing
The printer terminates the printing operation. Once the
new paper and ink ribbon are loaded, the printing operation
automatically resumes and the remaining images are
printed.
Canceling continuous printing
Press the STOP button. The current item finishes printing,
and the printer enters the ready state once the printout is
ejected.
Storing printouts
• Avoid storing printouts in a location subject to high
temperatures, high humidity, or direct sunlight. Such
conditions could result in fading.
• Do not stick tape on a printout. Also, do not let printouts
come into contact with materials which contain
plasticizers, such as erasers or desk mats.
• Do not allow volatile organic solvents, such as alcohol,
to come into contact with printouts.
To Next Page
Loading...
