EasyManua.ls Logo

Sony URX-P40 - User Manual

Sony URX-P40
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
UHF Wireless Microphone Package
UHF Synthesized Transmitter
UHF Synthesized Wireless Microphone
UHF Synthesized Diversity Tuner
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
UWP-D21/D22/D26/D27
UTX-B40
UTX-M40
UTX-P40
URX-P40
URX-P41D
5-042-114-11 (1)
© 2022 Sony Corporation

Questions and Answers

  • K
    Karen YoungAug 27, 2025
    How to fix a Sony URX-P40 Microphone system that does not turn on?
    • E
      Erin WallaceAug 27, 2025
      If your Sony Microphone system is not turning on, ensure the batteries are inserted with the correct polarity. Replace low batteries with new ones. Clean any dirt from the battery terminals and the battery compartment with a cotton swab. If using battery power, make sure batteries are inserted and the power source is set to 'BATT ONLY'. If using the SMAD-P5, check that it is correctly connected to the camera or tuner and that the power supplies for the tuner and camera are correctly linked.
  • M
    micheleortizAug 23, 2025
    How to fix no sound on Sony Microphone system?
    • G
      Garrett ContrerasAug 23, 2025
      If your Sony Microphone system isn't producing any sound, make sure the channel setting on the transmitter matches the tuner. Confirm the transmitter is on and reduce the distance between it and the tuner if the transmission output is weak. Ensure the transmitter is set to microphone input, not line level. The compander mode setting on both devices should be the same. Also, check if the transmitter is muted and change the MUTE SETTING if it is set to PTT HOLD.

Summary

Name and Function of Parts

Body-pack Transmitter (UTX-B40) Parts

Identifies and describes the components of the UTX-B40 body-pack transmitter.

Power Supply

Inserting Batteries

Provides instructions on how to correctly insert AA batteries into the devices.

USB Power Supply

Explains how to power the devices using a USB connector.

Tuner Settings

Setting the Receive Channel

Guide on selecting the appropriate channel group and number for reception.

Transmitter Settings

Setting the Transmit Channel

Guide on selecting the appropriate channel group and number for transmission.

Troubleshooting

Unit Power Issues

Solutions for problems related to the unit not turning on.

Audio Signal Problems

Troubleshooting steps for weak, distorted, or noisy audio signals.

Channel Setting Issues

Resolving problems with setting or receiving channels.

Sony URX-P40 Specifications

General IconGeneral
Audio Frequency Response20 Hz to 20 kHz
Tuning Steps25 kHz
Frequency Range470 to 608 MHz
ModulationFM
Signal-to-Noise Ratio> 100 dB
Operating RangeUp to 100 m (328 ft)
Distortion< 0.5%
Antenna TypeDiversity Antenna
Operating Temperature0°C to 50°C
Storage Temperature-20°C to 60°C
Battery TypeAA
Power SupplyDC 3V

Related product manuals