EasyManua.ls Logo

Sony UWP-V1 - User Manual

Sony UWP-V1
72 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3-870-284-13 (1)
© 2008 Sony Corporation
Wireless Microphone
Package
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
UWP-V1/V2/V6
UWP-X7/X8
For U30/U42/CE62/CE67 models only
The supplied CD-ROM includes the Operating Instructions for the UWP-V1/V2/
V6/X7/X8 Wireless Microphone System (English, French, German, Italian, and
Spanish versions) and the frequency lists in PDF format.
For more details, see “Using the CD-ROM Manual (U30/U42/CE62/CE67
Models only)” on page 34.

Table of Contents

Other manuals for Sony UWP-V1

Preview: Service Manual
Service Manual164 pages
Preview: User Manual
User Manual12 pages

Questions and Answers

  • V
    Vincent CisnerosAug 13, 2025
    Why is there sound interruption or noise in my Sony Microphone system?
    • K
      kristen97Aug 14, 2025
      Sound interruption or noise in your Sony Microphone system can occur if the transmitter and tuner are not set to the same channel. Ensure that both are using the same channel. Also, using the same channel for multiple transmitters can cause interference; assign a different channel to each transmitter. Ensure all transmitters are set to channels within the same channel group. If operating multiple UWP series packages, select channels within the same channel group (excluding group 00), and maintain at least a 2-channel interval (250 kHz) between them.
  • R
    Rachel MeyersAug 17, 2025
    What to do if there is no sound from my Sony Microphone system?
    • R
      Rachel HobbsAug 17, 2025
      If there is no sound from your Sony Microphone system, first check that the channel setting on the transmitter matches the tuner. Next, confirm that the transmitter is turned on and that the RF indicator on the tuner is lit. Ensure the microphone input is selected on the transmitter, not the line input. If using an MB-X6/SRP-X500P, turn it off and on again if the tuner module was installed or uninstalled while it was powered on.
  • P
    Patty StewartAug 21, 2025
    How to fix a Sony Microphone system that does not turn on?
    • A
      Ariana GilbertAug 21, 2025
      If your Sony Microphone system does not turn on, ensure that the batteries are inserted with the correct polarity. If they are, the batteries may be exhausted, so try replacing them with new ones. Also, check the battery terminals in the transmitter; if they're dirty, clean the + and – terminals with a cotton swab.
  • C
    Chris RodriguezAug 25, 2025
    Why do the batteries in my Sony Microphone system drain so quickly?
    • T
      tamara11Aug 26, 2025
      If the batteries in your Sony Microphone system are draining quickly, the batteries may be exhausted and need replacing. If you're using manganese batteries, switch to alkaline batteries, as they last more than twice as long. Be aware that UWP series components used under cold conditions may also experience rapid battery drain.
  • E
    Erin RosarioAug 29, 2025
    What causes distortion in the sound from my Sony Microphone system?
    • R
      Robert VaughnAug 29, 2025
      Distortion in the sound from your Sony Microphone system can be due to several reasons. If the attenuation level of the transmitter is too low, increase it by pressing the + button in attenuation level setting mode. Ensure that the transmitter and tuner are set to the same channel. If you're using headphones, make sure they have a stereo mini jack. Also, verify that the MIC/LINE input selector is correctly set to LINE if you are inputting a line output signal.
  • M
    Mark WilliamsSep 2, 2025
    Why is the sound weak on my Sony Microphone system?
    • G
      Gary RhodesSep 2, 2025
      If the sound from your Sony Microphone system is weak, first check the attenuation level on the transmitter and decrease it by pressing the – button in attenuation level setting mode. Make sure that the volume on the amplifier or mixer is appropriately adjusted. Also, ensure that the microphone input is selected on the transmitter, not the line input.
  • G
    Gary BaileySep 5, 2025
    What does it mean when the RF indicator is on even when the Sony Microphone system transmitter is off?
    • A
      Amy BrownSep 5, 2025
      If the RF indicator on the tuner of your Sony Microphone system lights up even when the transmitter is off, it may be due to jamming radio waves. Try locating a channel group that is not affected by these jamming radio waves and switch to that channel group.
  • K
    Kristin SmithSep 9, 2025
    How to change the channel on my Sony Microphone system?
    • S
      Scott WolfeSep 9, 2025
      To change the channel on your Sony Microphone system, if pressing the SET button alone doesn't work, restart the unit while holding down the SET button. Then, use the + and – buttons to change the channel.

Summary

Wireless Microphone Package

Operating Instructions

Read this manual thoroughly before operating the unit and retain it for future reference.

Transmitter Information and Warnings

Notice for U.S. Customers

Details FCC regulations, licensing, and modifications affecting operation.

Regional Compliance and Frequency Information

Notice for European Customers

Declares compliance with EU directives and lists countries where the product is intended for use.

Using the CD-ROM Manual

Preparations for CD-ROM Use

Instructions on installing Adobe Reader and system requirements for accessing the CD-ROM.

Reading CD-ROM Manual Content

Steps to insert the CD-ROM and open operating instructions or frequency lists.

Component Parts Identification

Body-pack Transmitter (UTX-B2) Identification

Identifies parts of the UTX-B2 body-pack transmitter, including connectors and indicators.

Hand-held Microphone (UTX-H2) Identification

Identifies parts of the UTX-H2 hand-held microphone and its display.

Plug-on Transmitter (UTX-P1) Identification

Details the parts of the UTX-P1 plug-on transmitter, including input selectors and indicators.

Portable Diversity Tuner (URX-P2) Identification

Diversity Tuner Module (URX-M2) Identification

Power Supply and Battery Management

Inserting Batteries into Components

Battery Status Indication

Attachment and Installation Procedures

Attaching Accessories to Transmitters

Attaching Accessories to Tuners

Installing Diversity Tuner Modules

System Operation

Initializing and Connecting Tuner

Setting Reception and Transmission Channels

Procedure to set reception channel on tuner and transmission channel on transmitter.

Tuner Settings and Operations

Setting the Reception Channel

Guide to selecting channel groups and numbers for reception.

Searching Available Channels

Selecting Channels on Multiple Tuners

Setting Monitor Output Level

Transmitter Settings and Adjustments

Setting the Transmission Channel

Procedure to select transmission channel and frequency for all UWP series transmitters.

Adjusting RF Output Power

How to set the RF output power level (H/L) for transmitters.

Adjusting Audio Input Attenuation

Resetting Accumulated Use Time

Error Messages and Meanings

Troubleshooting Common Issues

Important Usage Notes

Usage and Storage Precautions

Cleaning and Maintenance

Preventing Interference from Devices

Technical Specifications

Transmitter Specifications (UTX-B2;H2;P1)

Detailed technical specifications for UWP series transmitters.

Body-pack Transmitter (UTX-B2) Details

Hand-held Microphone (UTX-H2) Details

Plug-on Transmitter (UTX-P1) Details

Tuner Specifications (URX-P2;M2)

Detailed technical specifications for UWP series tuners.

Portable Diversity Tuner (URX-P2) Details

Diversity Tuner Module (URX-M2) Details

Sony UWP-V1 Specifications

General IconGeneral
TypeWireless Microphone System
ModulationFM
Audio Frequency Response50 Hz - 15 kHz
Signal-to-Noise Ratio100 dB or more
Frequency RangeUHF band
Operating FrequencyMultiple selectable frequencies
Dynamic Range100 dB
Total Harmonic Distortion0.5% or less
Operating RangeApprox. 100m (328 feet)
Power Supply2 x AA batteries
Battery Type (Transmitter)AA alkaline battery
Charging Time (Transmitter)Not applicable
Connector (Receiver)3.5 mm mini-jack
Operating Temperature0°C to 40°C
Dimensions (Transmitter)58 x 98 x 22 mm
Weight (Transmitter)Approx. 85g (without battery)

Related product manuals