Sony VPL-BW7 - Step 2: Connecting the Projector; Connecting to a VCR

GB
18
Step 2: Connecting the Projector
When making connections, be sure to do the following:
• Turn off all equipments before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or
poor picture quality. When pulling out a cable, be sure to pull it out with holding the
plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.
To connect to a DVD player/recorder and Blu-ray Disc player equipped with
HDMI output
You can enjoy better picture quality by connecting a DVD player/recorder and Blu-ray
Disc player equipped with HDMI output to the HDMI input of the projector.
Connecting to a VCR
U
T A
INPUT
SERVICE
HDMI cable (not supplied)
: Video signal flow
Rear of the projector
DVD player/recorder and
Blu-ray Disc player, etc.,
with the HDMI output
to HDMI output
AV amplifier
Speakers
When using an optional HDMI cable, be sure to use
a cable that has acquired an HDMI logo.
............................................................................................................................................................
This projector supports PC Display input of HDMI. It also supports HDCP.