Sony VPL-CS20 - User Manual

Other manuals for Sony VPL-CS20

Service Manual98 pages

Quick Reference Manual88 pages

Specifications2 pages

Questions and Answers

C
clarkeashleyAug 29, 2025
What does it mean when the LAMP/COVER indicator lights up on my Sony VPL-CS20 Projector?
- A
  Amy MoodyAug 29, 2025
  When the LAMP/COVER indicator lights up on your Sony Projector: * The lamp has reached the end of its life. Replace the lamp. * The lamp has reached a high temperature. Wait for 45 seconds to cool the lamp and then turn on the power again. * If the LAMP/COVER indicator still lights even after you have replaced the lamp, consult with qualified Sony personnel.
D
David GordonAug 28, 2025
How to make the picture clearer on Sony VPL-CS20 Projector?
- N
  Nicholas CainAug 28, 2025
  If the picture on your Sony Projector is not clear: * Adjust the focus, as the picture may be out of focus. * Condensation may have accumulated on the lens. Leave the projector for about two hours with the power on.
J
joyceballAug 27, 2025
Why is the color balance incorrect on my Sony VPL-CS20 Projector?
- T
  Timothy DavidsonAug 27, 2025
  If the color balance on your Sony Projector is incorrect: * Adjust the picture, as it may not have been adjusted properly. * The projector may be set to the wrong color system. Set “Color System” on the Setup menu to match the color system being input.
L
Larry MooreAug 27, 2025
How to brighten a dark picture on Sony VPL-CS20 Projector?
- D
  douglas89Aug 27, 2025
  If the picture on your Sony Projector is too dark: * Adjust the contrast or brightness on the “Adjust Picture...” menu of the Picture menu properly. * The lamp may have burnt out or is dim. Replace the lamp with a new one.
E
Elizabeth MackAug 25, 2025
How to fix a Sony Projector that will not turn on?
- J
  Jonathan PowersAug 26, 2025
  If your Sony Projector isn't turning on, there are a few things to check. If the power was recently turned off and on using the ?/1 key, wait about 45 seconds before attempting to turn it on again. Ensure that the lamp cover is securely closed and that the air filter cover is properly attached.
J
Julie RogersAug 25, 2025
What to do if my Sony VPL-CS20 power is not turned on?
- P
  Pedro BrownAug 25, 2025
  If your Sony Projector is not turning on, it could be due to the following reasons: * The power has been turned off and on with the ?/1 key at a short interval. Wait for about 45 seconds before turning on the power. * The lamp cover is not secured. Close the lamp cover securely. * The air filter cover is detached. Attach the air filter cover securely.