24
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/CX100/CX120/CX125/CX150/CX155/CW125/FE40/FE40L/FH300L/FX40/FX40L/FX51/FX52/FX52L/FW300L/PX35/PX40/PX41
9. [Input switch list inquiry] INST?
This command obtains the input switch list.
The projector responds as follows:
When normal :
Returns a source No. whose input can be switched.
The source Nos. are as follows :
Source No. 21 : Projector input Video
Source No. 22 : Projector input S-Video
Source No. 31 : Projector input Input A
Source No. 32 : Projector input Input B
Source No. 33 : Projector input Input C
Source No. 34 : Projector input Input D
Source No. 35 : Projector input Input E
Source No. 36 : Projector input Input F
Source No. 51 : Projector input Network
Therefore, the response will be as follows for example:
(The number of the input channels varies depending on the model.)
“21 22 31 32 33”
Unacceptable period (when the power status is other than Power ON) : Returns “ERR3”.
Projector error occurring (including warning) : Returns “ERR4”.
10. [Projector name inquiry] NAME?
This command obtains the projector name.
The projector responds as follows :
When normal :
Returns a projector name. (The projector name is displayed as a nickname for the projector’s GUI.)
Returns a space when no projector name is set.
Projector error occurring (including warning) : Returns “ERR4”.
11. [Manufacturer name inquiry] INF1?
This command obtains the manufacturer name.
The projector responds as follows:
When normal : Returns a manufacturer name (SONY).
Projector error occurring (including warning) : Returns “ERR4”.
12. [Model name inquiry] INF2?
This command obtains the model name.
The projector responds as follows:
When normal : Returns a model name.
Projector error occurring (including warning) : Returns “ERR4”.
To Next Page
