25
VPL-CX61/CX63/CX75/CX76/CX80/CX85/CX86/CX100/CX120/CX125/CX150/CX155/CW125/FE40/FE40L/FH300L/FX40/FX40L/FX51/FX52/FX52L/FW300L/PX35/PX40/PX41
13. [Other information inquiry] INFO?
This command obtains other information.
The projector responds as follows:
When normal : Returns a space.
Projector error occurring (including warning) : Returns “ERR4”.
14. [Class information inquiry] CLSS?
This command obtains the class information.
The projector responds as follows:
When normal : Returns “1”.
Projector error occurring (including warning) : Returns “ERR4”.
3-5. DDDP
The following model is equipped with the protocol conforming DDDP stipulated by AMX.
For details about DDDP, contact AMX.
You can turn on or off DDDP from the Web setting screen > Setup > Advanced Menu > Service.
This protocol is set to OFF by default.
n
Proper communication may not be possible without setting the default gateway.
DDDP corresponding model
VPL-FE40, VPL-FE40L, VPL-FX40, VPL-FX40L, VPL-CX125, VPL-CX155, VPL-CW125, VPL-
FH300L, VPL-FW300L
* The FE and FX series are supported by software version 1.01 and higher, and the CX series by version 1.02 and higher.
To Next Page
