18
Turning Off the Power
8 Adjust the size of the picture and the
focus.
Adjust the picture size using the Zoom
ring and adjust the picture focus using
the Focus ring.
Turning Off the
Power
1 Press the ?/1 key.
“POWER OFF? Please press ?/1 key
again.” appears to confirm that you want
to turn off the power.
The message disappears if you press any
key other than the ?/1 key, or if you do not
press any key for five seconds.
2 Press the ?/1 key again.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat. Also, the ON/
STANDBY indicator flashes quickly for
the first 45 seconds. During this time,
you will not be able to light up the ON/
STANDBY indicator again with the ?/1
key.
3 Unplug the AC power cord from the
wall outlet after the fan stops running
and the ON/STANDBY indicator
lights in red.
Do not unplug the AC cord while the fan is
still running; otherwise, the fan will stop even
though the internal heat is still high, which
could result in a breakdown of the projector.
Note
Note
To Next Page
Loading...
