23
The Screen Menu
Adjustments and Settings Using a Menu
*3: Available when a video signal is input from the YPBPR input terminal (INPUT A), DVI-D input
terminal, and HDMI input terminal.
*4: Available when a computer signal is input from the RGB input terminal (INPUT A, INPUT B).
*5: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the “Phase,”
“Pitch,” and “Shift” items manually.
*6: Available when a computer signal is input from the RGB input terminal (INPUT A, INPUT B)
or a video signal is input from the YP
BPR input terminal (INPUT A). This option is available
only when “Aspect” is set to “Zoom.”
To Next Page
Loading...
