45
If the indicators flash in a manner other than described above, unplug the AC power cord and make sure
the ON/STANDBY indicator turns off, then plug the AC power cord into the wall outlet and turn on the
projector.
If the problem still persists, consult with qualified Sony personnel.
Twice The temperature in the projector is abnormal.
Check if the air filter is clogged, then clean or replace it (page 49).
Check if the ventilation holes (intake/exhaust) are not blocked by the wall
or an object and secure a sufficient gap.
Check the ambient temperature and use the projector within the range of
operating temperature.
Indicator status The number of flashes Meaning/Remedies
(Flashes
in red)
(Flashes
in red)
Both indicators
flash
To Next Page
Loading...
