33
Projecting
Adjusting the Picture Quality
You can adjust the picture quality that suits your taste by selecting the adjustment items
with the remote control. The adjusted data can be stored in each picture mode.
To adjust contrast and
brightness
Press CONTRAST +/– on the remote
control to adjust the contrast.
Press BRIGHT +/– on the remote control
to adjust the brightness.
1 Press ADJ PIC.
Each time you press the button, the
following adjustment windows* are
displayed in sequence.
* Some of the above adjustment windows
will not be displayed depending on the
input signal. For details, see “Input
Signals and Adjustable/Setting Items.”
(1 page 66)
INPUTLIGHT
STANDARD
CINEMA
DYNA MIC
USER 2
PICTURE MODE
REAL COLOR PROCESSING
USER 3USER 1
ADJ PIC
MENULENS
RCP
BRIGHT CONTRAST
RESET
WIDE MODE
ENTER
CONTRAST +/–
button
BRIGHT +/–
button
ADJ PIC button
To Next Page
Loading...
