Sony VPL-VW95ES User Manual

20
Step 2: Adjusting the Picture Position
Project an image on the screen and then adjust the picture position.
Tip
The
?/1 (ON/STANDBY), INPUT, MENU, and M/m/</,/ (joystick) buttons on the side
panel of the projector function the same as those on the remote control. The LENS button functions
in the same way as the LENS ADJUSTMENT (FOCUS, ZOOM, SHIFT) button of the remote
control.
Depending on the installation location of the projector, you may not control it with the remote
control. In this case, point the remote control to the screen instead of the projector.
Note
1 After connecting the AC power
cord to the projector plug the
AC power cord into a wall outlet.
The ON/STANDBY indicator lights
in red and the projector goes into
standby mode.
ON/STANDBY indicator
Remote control detector
3, 4, 5
POSITION
button
2
1
?/1 (ON/
STANDBY)
switch
Lights in red.

Sony VPL-VW95ES Specifications

General

Lamp type	UHP
Native resolution	1920 x 1080 pixels
Native aspect ratio	16:9
Projection technology	SXRD
Screen size compatibility	40 - 300 \
Projector native resolution	1080p (1920x1080)
Vertical synchronization (max)	92 kHz
Vertical synchronization (min)	48 kHz
Horizontal synchronization (max)	72 kHz
Horizontal synchronization (min)	19 kHz
Bulb power	200 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Power consumption (typical)	300 W
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	35 - 85 %
Product color	Black
Interface	2 x HDMI
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Consumer Electronics Control (CEC) support	Yes
Light source type	Lamp
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Product type	Large venue projector
Focal length range	18.5 - 29.6 mm
Aperture range (F-F)	2.5 - 3.4
Display diagonal	0.61 \
Ethernet LAN	No
Noise level	- dB

Weight and Dimensions

Depth	179.2 mm
Width	470 mm
Height	484.9 mm
Weight	1100 g
Dimensions (WxDxH)	470 x 179.2 x 484.9 mm