Sony VPL-VW95ES User Manual

82
USB charging AC power adaptor
(AC-UD10) (1)
Specifications
Input voltage: AC 100 to 240 V,
0.2 A, 50/60 Hz
Rated output voltage: DC 5 V,
1.5 A
Please use the above power
requirements.
AC power cord for USB charging
AC power adaptor (1)
For the customers in the
U.S.A. and Canada
WARNING:
Using this unit at a voltage other
than 120 V may require the use
of a different line cord or
attachment plug, or both. To
reduce the risk of fire or electric
shock, refer servicing to
qualified service personnel.
USB charging cable (GPHK05 -
2010 - 0007/SONY) (1.2 m) (1)
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp LMP-H202 (for replacement)
Projector Suspension Support PSS-H10
3D glasses
TDG-PJ1
3D Sync Transmitter
TMR-PJ1
Warning on power connection
Use a proper power cord for your local power supply.
* Use a rated plug that complies with the regulation of each country/region and the specifications.
Note
The United States,
Canada
Continental
Europe
UK, Ireland,
Australia,
New Zealand
Japan China
Plug type YP-3 YP-12A * YP-359 VM0722
Female end YC-13 YC-13D VM0303B YC-13 VM0724
Cord type SVT H05VV-F CEE (13)
53 rd (OC)
VCTF 227 IEC
53(RVV)
Rated Voltage
& Current
10A/125V 10A/250V 10A/250V 12A/125V 10A/250V
Safety approval UL/CSA VDE VDE
DENANHO CCC

Sony VPL-VW95ES Specifications

General

Lamp type	UHP
Native resolution	1920 x 1080 pixels
Native aspect ratio	16:9
Projection technology	SXRD
Screen size compatibility	40 - 300 \
Projector native resolution	1080p (1920x1080)
Vertical synchronization (max)	92 kHz
Vertical synchronization (min)	48 kHz
Horizontal synchronization (max)	72 kHz
Horizontal synchronization (min)	19 kHz
Bulb power	200 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Power consumption (typical)	300 W
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	35 - 85 %
Product color	Black
Interface	2 x HDMI
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Consumer Electronics Control (CEC) support	Yes
Light source type	Lamp
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Product type	Large venue projector
Focal length range	18.5 - 29.6 mm
Aperture range (F-F)	2.5 - 3.4
Display diagonal	0.61 \
Ethernet LAN	No
Noise level	- dB

Weight and Dimensions

Depth	179.2 mm
Width	470 mm
Height	484.9 mm
Weight	1100 g
Dimensions (WxDxH)	470 x 179.2 x 484.9 mm