Outputs LINE OUT (stereo minijack)
x
1
output level 0.25V (less than
4.7
kilohms)
Headphones (stereo
minijack)
xl
load impedance 8-300 ohms
Power output Headphones
30mW+30mW (at 10%
harmonic distortion)
load impedance 32 ohms
Battery life See page
4.
Power requirements
6
V
dc, four batteries, size
AA
(IEC designation R6)
External power input jack
(required power 6
V
dc)
accepts Sony
AC-D4HG AC
power adaptor (optional) for
use on 120
V
ac 60 Hz or Sony
DCC-127A car battery cord
(optional) for use on 12
V
car
battery
Dimensions 181
~40x95 mm (wlhld)
(71/4x1%x3% inches)
including projecting parts
Weight
Approx. 640 g (1
Ib 702)
including batteries
Supplied accessories
Stereo headphones (1)
Connecting cord (1)
Carrying case and shoulder
strap (1 set)
Design and specifications subject to change
without notice.
OPTIONAL ACCESSORIES
AC power adaptor AC-D4HG
Car battery cord DCC-127A
Electret condenser stereo microphone
(with stereo miniplug) ECM-717,
ECM-909A
Stereo headphones
MDR-94, MDR-CD550
Connecting cord
RK-G129HG (stereo rniniplug to two phono
plugs)
RK-G136HG
(stereo miniplug to stero
mini-plug)
Plug adaptor
PC-239s (stereo miniplug to two
minijacks)
Continued trouble-free operation of any tape
recorder is dependent on the quality of the
cassettes used in conjunction with it. The
use of Sony cassettes is recommended for
high quality recording and trouble-free opera-
tion.
Your dealer may not handle some of the
above listed optional accessories. Please ask
the dealer for detailed information about the
optional accessories available in your
country.
To Next Page
Loading...
