Help Guide
Wireless Stereo Headset
WF-C510
Turning on the headset
When the headset is stored in the charging case
When the headset is not stored in the charging case
After 15 minutes of Bluetooth disconnection, the headset turns off automatically. In this case, the headset will turn on by
pressing and holding the buttons on both headset units for about 2 seconds or more. The headset units will also turn on
when they are set in the charging case and then removed from the charging case.
When the headset is turned on
When both headset units are removed from the charging case, the connection is established between the left and right
headset units.
When turning on the headset for the first time after purchase or just after initializing the headset, the headset goes into
Bluetooth pairing mode.
If you press the button on the left or right unit when the headset is not connected via a Bluetooth connection, you will
hear a notification sound indicating that the headset is turned on.
Related Topic
Using only one headset unit
Turning off the headset
What you can do with the “Sony | Sound Connect” app
5-060-551-11(5) Copyright 2024 Sony Corporation
Remove the headset units from the charging case.
The headset turns on automatically.
When you remove only one headset unit from the charging case, only the removed unit turns on.
1
To Next Page
Loading...
