Help Guide
Wireless Stereo Headset
WF-C510
Connecting to a paired computer (Windows 11)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to the
operating instructions supplied with the computer.
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
1
Remove the headset units from the charging case.
The headset turns on automatically.
When the headset has automatically connected to the last connected device, you will hear a notification sound
indicating that the connection is established from both headset units (or from the headset unit removed from the
charging case when only one headset unit is removed) at the same time.
Check the connection status on the computer. If it is not connected, proceed to step 3.
2
On your computer screen, right-click the speaker icon on the toolbar, then select [Sound settings].
3
On the [Sound] screen, select [WF-C510] for [Output] and [Input].
4
To Next Page
Loading...
