Sony XM-C2000 - User Manual

- Power supply system
Pulse power supply circuitry
Speaker impedance
2-8o0hms
Maximum power output (4 ohms)
speaker
stereo monaural
65 W x 2 65W x2 65Wx2
Rated power output at 14.4 V battery voltage
(4 ohms) (Ad Hoc Commitee standards)
stereo monaural
80 W
High/Front | Mid-range/
Rear speaker
High/Front | Mid-range/
Rear speaker
30 W x2
70Hz-20 | 70 Hz - 20 kHz |20- 140
kHz 0.04% |0.04% THD Hz 0.04%
THD
Frequency response
High/Front: 70 Hz — 100 kHz (78 dB)
Mid-range/Rear: 70 Hz — 100 kHz
(*9 dB)
Sub-woofer: 5 — 140 Hz (78 dB)
(Sub-woofer line output:
5 — 140 Hz)
Harmonic distortion
Less than 0.005% 4 ohms
(Sub-woofer line output:
less than 0.003%)
Input jevel adjustment range
0.2-2V
Signal-to-noise ratio
More than 108 dB (IHF-A, WTD)
XM-C2000
US Model
Canadian Model
AEP Model
E Model
UK Model
SPECIFICATIONS
Crossover frequency
High/Mid-range crossover point
3.5 kHz, 5 kHz, 7 kHz
Front (2-way only)
HPF: 70 Hz, 100 Hz, 140 Hz
Mid/Rear
HPF: 70 Hz, 100 Hz, 140 Hz
Sub-woofer
LPF: 70 Hz, 100 Hz, 140 Hz
Sub-woofer line output
LPF: 70 Hz, 100 Hz, 140 Hz
Crossover slope
12 dB/oct (Crossover point)
6 dB/oct (Front, Mid/Rear HPF)
18 dB/oct (Sub-woofer LPF)
Power requirements
12 V DC car battery (negative
ground)
Source voltage 10.5-16V
Current drain 2/7 A (at rated output)
30 A (at 10% THD)
Dimensions Approx. 296 x 50 x 209 mm
(w/h/d) (113/4 x 2 x 81/4 in.)
Mass Approx. 2.8 kg
(6 Ib. 3 02.)
Accessories supplied
Mounting screws (4)
Protection plate (1)
Speaker leads (2 sets)
Design and specifications subject to change without
notice.
STEREO POWER AMPLIFIER
SONY.

Sony XM-C2000 Specifications