21APX 320/530/740
Operating Instructions
Armstrong interlude and silhouette mount
An optional mounting kit will be made available soon.
Serial Console Connection
You can connect a serial console to the RJ45 COM port of your Access Point. For example,
you can use the HyperTerminal program which is included with most versions of Microsoft
Windows to log onto the appliance console. Use an appropriate adapter to connect the
console to your hardware appliance.
The required connection settings are:
Ì Bits per second: 115,200
Ì Data bits: 8
Ì Parity: N (none)
Ì Stop bits: 1
Access via the serial console is activated by default on ttyS1.
To Next Page
Loading...
