Sorma BSS-134 - Page 43

42
ELECTRIC PANEL
BSS-134
CHAP.- 8
504 Request Discarge Anticipation (mm) =
if the fi eld is 0, there is no advance unload request.
if the fi eld is other than 0, the unload request is anticipated by "x" mm with respect to the
end of the unwinding of the mesh/fi lm.
example:
if the package is 400mm long and fi eld 504 is set to 150mm, the unload request is carried
out after 250mm of mesh/fi lm are unwound.
512 CLOSING PLIERS ANTICIPATION (mm) =
if the fi eld is 0, there is no advanced gripper closure.
if the fi eld is other than 0, the closure of the gripper is anticipated by "x" mm with respect
to the end of the unwinding of the mesh/fi lm.
example:
if the package is 400mm long and fi eld 512 is set to 40 mm, the closure of the gripper is
carried out after 360 mm of mesh/fi lm are unwound.
fi eld A = indicates the gripper closure time (in sec).
fi eld B = indicates the time between the end of unwinding of mesh/fi lm and the closure of the gripper.
fi eld A
fi eld B
By pressing from page 21, page 22 will appear