soulution
nature of sound
Seite 12
nal paths also asymmetrical cables warrant a high class connection. Top quality
connecting cable and optimal layout prerequisite.
Security advice:
Please follow the security advices on page 6!
While manipulating with cables the power amplifier 710 has to remain discon-
nected from the mains. Before you disconnect the mains the power amplifier 710
has to be in operating condition OFF.
Due to the very high current impulse rating of your power amplifier 710 a wrong ca-
bling or defective cables may destroy your loudspeakers.
Excessive volumes due to in appropriate handling may cause hearing damages.
4.3.3
4.3.34.3.3
4.3.3 Speaker (C)
Speaker (C)Speaker (C)
Speaker (C)
Connect your loudspeakers to the power amplifier 710. The tremendous stability of
the power amplifier 710 ensures optimal operation for all types of speaker cables.
We recommend using top quality speaker cables with spade lugs.
Security advice: Please follow the security advices on page 6!
While manipulating with cables the power amplifier 710 has to remain discon-
nected from the mains. Before you disconnect the mains the power amplifier 710
has to be in operating condition OFF.
Check the connectors for tight fit. Check the cables for eventual damages. Short cir-
cuits provoked by thin threads form loudspeaker cables may end in a fire.
The power amplifier 710 comes with CE-darners which only can be removed with
tools.
4.3.4
4.3.44.3.4
4.3.4 LINK
LINKLINK
LINK (D)
(D) (D)
(D)
With the LINK-system the power amplifier 710 can be remote controlled by the pre-
amplifier 720/721. Connect the Slave-In of your power amplifier 710 with the Mas-
ter-out of the preamplifier 720/721. With Next-Slave you may connect further com-
ponents to the LINK-network.
To Next Page
Loading...