Soulution 710 - Settings (E)

Power
PowerPower
Power Amplifier
AmplifierAmplifier
Amplifier 710
710710
710
User Manual
Page 13
4.3.5
4.3.54.3.5
4.3.5 Settings (E)
Settings (E)Settings (E)
Settings (E)
The settings define the condition of your power amplifier 710 after switch on of the
mains.
Important:
New settings for Start-Mode, Start-Input and Bright-
ness are activated only after switch on of the mains.
4.3.5.1
4.3.5.14.3.5.1
4.3.5.1 Start
StartStart
Start-
--
-Mode
ModeMode
Mode
Start-Mode defines the operating condition after switch-on of the mains
(ON/OFF/LINK).
Start
StartStart
Start-
--
-Mode
ModeMode
Mode ON:
ON: ON:
ON:
After switch on of the mains the power amplifier 710 is started automatically. It can
only be switch-of after it has reached the operating condition ON.
Start
StartStart
Start-
--
-Mode OFF:
Mode OFF:Mode OFF:
Mode OFF:
After switch on of the mains the power amplifier 710 changes to the operating con-
dition OFF.
Start
StartStart
Start-
--
-Mode
Mode Mode
Mode LINK
LINKLINK
LINK:
::
:
After switch on of the mains the operating condition of the power amplifier 710 gets
controlled by the preamplifier. If the LINK–connection is missing the amplifier
changes to operating condition OFF.
Security advice: We suggest the use of Start-Mode ON only if the front
panel of the power amplifier 710 is not access able and the LINK – system is not
installed.
Please be aware that the amplifier will start-up automatically and unattended after
power blackout.
4.3.5.2
4.3.5.24.3.5.2
4.3.5.2 St
StSt
Start
artart
art-
--
-Input
InputInput
Input
With Start-Input the active input after switch-on is defined (1. SYM / 2. ASYM).