SoundCraft Notepad 12FX User Manual

5.1.1: MONO INPUT CONTROLS
CHANNEL CONTROLS > MONO INPUT CONTROLS
5.1.1: MONO INPUT CONTROLS
Level
Adjust signal level
The channel level control adjusts level between -innity (no signal), when rotary is rotated all the way to the left to
+10dB when rotated all the way to the right.) The 0dB line indicates unity or no level change. Rotary level knobs are
the primary mixing tools during performance; the relative levels of the input channels across the console determine
the Master Stereo mix.
MASTER
All mix channels are routed to the Master left/right bus
Each input channel’s output is always routed to the Master left/right bus. The Pan/Balance controls the proportion
of the signal send to the left and right Master bus channels.
NOTEPAD 5, 8FX, 12FX User Manual

SoundCraft Notepad 12FX Specifications

General

Type	Analog Mixer
Channels	12
Mic Preamps	4
Aux Sends	1
USB	1 x USB Type B
Computer Connectivity	USB
EQ Bands	3-band EQ
Phantom Power	Yes
Inputs	12 (4 x Mono Mic/Line, 2 x Stereo Line, 2 x Stereo RCA)
Effects	Lexicon Effects (Reverb, Chorus, Delay)