SoundCraft Notepad 12FX User Manual

8.2: PROCESSING
LEXICON FX > REVERBS
8.2: PROCESSING
Delay + Reverb
In this mode, the parameter control is mapped to vary all three parameters of the selected eects; the number of
repeats, the reverb time and the room size to produce a progressively fuller sound. Delay is processed rst such that
reverb tails are present on each repeat.
Tap tempo is also active in this mode to set the repeat time.
Delay + Chorus
Inthismode,theparametercontrolsetsthenumberofrepeats.Thechoruseffectisxedatamid-range
setting.
Tap tempo is also active in this mode to set the repeat time.
Reverb + Chorus
In this mode, the parameter control is mapped as it would be for Reverb on its own; the reverb time and the room
size. The chorus eect is xed at a mid-range setting and a small amount of this combined eect is particularly
eective on vocals and acoustic guitars.
Karaoke
Pressing down Delay, Chorus and Reverb loads a simple to use slap-echo processing eect for use in Karaoke sit-
uations where more depth is required. The Parameter knob controls a combination of the repeat time and eect
tail length.
NOTEPAD 5, 8FX, 12FX User Manual

SoundCraft Notepad 12FX Specifications

General

Type	Analog Mixer
Channels	12
Mic Preamps	4
Aux Sends	1
USB	1 x USB Type B
Computer Connectivity	USB
EQ Bands	3-band EQ
Phantom Power	Yes
Inputs	12 (4 x Mono Mic/Line, 2 x Stereo Line, 2 x Stereo RCA)
Effects	Lexicon Effects (Reverb, Chorus, Delay)