Calibration
Page 20
CAUTION
Under normal circumstances it will not be necessary to adjust
the calibration of the temperature sensor. If calibration is
required, please contact a trained HVAC technician to
correctly perform the following procedure.
OWNER'S MANUAL
Press the NEXT button twice
to advance to the calibration
screen.
Press NEXT
two times
to advance
Adjust the temperature
reading using the WARMER
and COOLER buttons then
press the NEXT button to
store the new value.
Press NEXT
to store the
new value
When the Cycles Per Hour is
flashing, press and hold the NEXT
button until this screen appears.
78
88
i8
:
88
AM
P
M
MTuWThF
SaSu
Start
Stop
Over
Ride
FAN
88
88
HEAT
AUX
COOL
Unoccupied123
ON
Auto
S1-THEM22P7S
Press NEXT four times
until this screen appears.
6
FAN
Auto
Press the PROGRAM button to enter the Advanced Setup.
When the clock is flashing, press the NEXT button for
5 seconds. Do not release the button until this screen
appears.
To Next Page
Loading...
Need help?
General
