Source 1 S1-THEM22P7S User Manual

Factory Defaults
Press NEXT four times
until this screen appears.
Page 19
CAUTION
OWNER'S MANUAL
If, for any reason, you desire to return all the stored settings
back to the factory default settings, follow the instructions below.
When the Cycles Per Hour is
flashing, press and hold the NEXT
button until this screen appears.
Press and hold the
NEXT button again
until this screen appears.
After restoring factory
defaults, the thermo-
stat screen will display
all icons.
Press the PROGRAM button to
return to normal operation.
NEXT
OFF
RUN
SET
PROGRAM
6
88
i8
:
88
AM
P M
MTuWThF
SaSu
Start
Stop
Over
Ride
FAN
88
88
HEAT
AUX
COOL
Unoccupied123
ON
Auto
88
i8
:
88
AM
P M
MTuWThF
SaSu
Start
Stop
Over
Ride
FAN
88
88
HEAT
AUX
COOL
Unoccupied123
ON
Auto
S1-THEM22P7S
FAN
Auto
Press the PROGRAM button to enter the Advanced Setup.
When the clock is flashing, press the NEXT button for
5 seconds. Do not release the button until this screen
appears.

Source 1 S1-THEM22P7S Specifications

General

Brand	Source 1
Model	S1-THEM22P7S
Category	Thermostat
Language	English