Stereo In, Stereo Out
This mode should be your default selection for Stereo In, Stereo Out applications. Stereo In, Stereo
Out allows you to continue your stereo chain of effects.
Stereo In, Mono Out
This mode will accept stereo input on jacks INPUT 1 and 2. Inputs 1 and 2 are sent to Channel 1 and 2
equalizers, respectively. The outputs of the Channel 1 and Channel 2 equalizers are mixed together
and sent to OUTPUT 1.
Additional Routing Modes
EQ2 supports an additional routing mode available in the Neuro Mobile App and the Neuro Desktop
Editor, External Loop 2 -> Loop 1.
To Next Page
Loading...
