2
WARNING: Read and understand all instructions and safety
information in this manual before operating or servicing this tool.
SAFETY
Safety is essential in the use and maintenance of Southwire Tools
and Equipment. This instruction manual and any markings on the
tool provide information for avoiding hazards and unsafe practices
related to the use of this tool. Observe all of the safety information
provided.
This manual is intended to familiarize all personnel with the safe
operation of the Southwire BEND
MAX
™
Power Bender. Keep this
manual available to all personnel. Replacement manuals are avail-
able at no charge at www.southwiretools.com.
All specifications are nominal and may change as design
improvements occur. Southwire Tools and Equipment shall
not be liable for damages resulting from misapplication or
misuse of its products.
PURPOSE OF THIS MANUAL
DESCRIPTION
The Southwire BENDMAX
™
Power Bender is intended to bend
3/4" to 2" conduit and pipe.
This bender has the capability to accommodate the following
types of conduit and pipe:
• Electrical Metallic Tubing
• Intermediate Metallic Conduit
• Rigid Conduit
To Next Page
Loading...
