SPALDING 881042 - Lift Bracket and Handle Arm Installation

18
1.
Install the lift bracket (22) and reinforcement bracket (17) with the carriage bolts (16) in the top pole (1) mounting
holes as shown. Tighten the flange nuts (13) completely.
1
1
22
16
17
13
FRONT SIDE
2.
Install the gas strut handle arm tubes (29) to the middle pole (2) using the hex bolt (23) and nylock nut
(18) as shown. Insert the plugs (30) into the tubes (29).
29
29
18
30
30
30
30
23
1
2