Need help?Do you have a question about the Spark Smart Mesh and is the answer not in the manual?
General| Connectivity Technology | Wireless |
|---|---|
| Frequency Band | 2.4 GHz, 5 GHz |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| Weight | 150g |
| Type | Repeater |
| Wireless Standard | IEEE 802.11ac |
| Maximum Speed | 1200Mbps |
| Ethernet Ports | 1 |
| Button | WPS |
| LED Indicators | Power, Ethernet |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | 70°C |
Instructions for pairing the Smart Mesh to a Smart Modem using an Ethernet cable and power adapters.
Guidance on optimal placement of the Smart Mesh unit for improved Wi-Fi coverage, considering modem proximity and obstacles.
Explains how to check the Smart Mesh signal strength using LED indicators and placement advice.
Steps for connecting new devices to the mesh Wi-Fi network and how existing devices connect automatically.
Instructions for pairing the Smart Mesh to a non-Spark modem in stand-alone mode, including disabling the modem's Wi-Fi.
Advice on placing additional Smart Mesh units to extend Wi-Fi coverage, within the modem's coverage area.
Troubleshooting steps for signal strength issues using LED indicators and WPS pairing.
Instructions for connecting devices to the mesh Wi-Fi network, using the main Smart Mesh's credentials.
Guide on how to access the Smart Mesh setup page via a web browser using default credentials.
Steps to change the Wi-Fi network name (SSID) and password through the Smart Mesh settings.
Instructions on how to adjust the brightness of the Smart Mesh LED indicator lights via the settings menu.
Detailed explanation of LED status lights (color, description, action) before and after pairing.
Identifies common problems with Smart Mesh setup and connectivity, providing solutions for each.
To Next Page