Spark Smart Mesh - Set up your Smart Mesh with other modems (stand-alone mode); How to pair your Smart Mesh to your modem

To Next Page

To Previous Page

Set up your Smart Mesh with

other modems (stand-alone mode)

2.1 How to pair your Smart Mesh to your modem

Plug your Smart Mesh into a working power

outlet next to your modem - If you don’t see

a light check that the power button is ON.

Connect the ethernet cable from your Smart

Mesh to your modem.

Wait for the light on your Smart Mesh to turn

solid BLUE.

Note: Please refer to the LED indicator

sequence diagram.

Disable the Wi-Fi on your current modem.

Note: Use the Wi-Fi (WLAN) button if your

modem has one, or log in to your modem’s

setup page.

Make sure your modem is connected rst before

you set up your Smart Mesh.

LED Indicator Sequence

Your Smart Mesh is paired to your modem.