Spearhead Excel 606 - Page 56

Spearhead
Oil level low Fill oil to correct level
Hydraulics not
responding
Oil pump suction filter
blocked
Replace filter element
Oil leak in pressure line
Check machine of leaks
Drive line broken Check pump is rotating
Joystick control
sluggish
Air in pilot lines from
joystick
Slacken off each line of pilot circuit individually at
spool valve whilst operating. When all air is
expelled retighten the line
Spool contacting with
housing
Check spool is free moving
Irregular arm
movement
Broken spring in spool
valve
Check spring
Failed ram seals
Repair ram
Faulty wiring Check wiring and switches
Electrically operated
valve not responding
Dirt in valve
Check of ingress of dirt
Sticking valve
Replace the valve
Insufficient voltage Attend to bad connection
Problem
Cause
Solution
Electrical switches not
responding
Faulty supply from tractor Check supply from your tractor fuse and
connections
Switch exposed to water
Store your machine under cover
Excel 606, 686, 726 & 836
56