43
• Consult the dealer or an experienced radio/TV technician for help.
ISED Statement
This device complies with Innovation, Science and Economic Development Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment should be installed and operated with a minimum distance of 20
millimeters between the radiator and your body.
CERTIFICATIONS
APPROVED
ICASA: TA-2020/8219
203 - JN1178
CNC ID: 21117
R-R-D99-TCDW2 03123-21-11817
EU IMPORTER ADDRESS
Specialized Europe GmbH, 6330 Cham, Switzerland
Werkstattgasse 10
6330 Cham
Switzerland
14. EC/UK – DECLARATION OF CONFORMITY
The manufacturer:
Specialized Bicycle Components Inc.
15130 Concord Circle
Morgan Hill, CA 95037, USA
Tel: +1 408 779-6229
Hereby confirms for the following products:
Product description:
EPAC (Electrically Power Assisted Cycle) Li-ion Battery Charger
Model designation:
COMO 3.0 / COMO 3.0 IGH / COMO 4.0
/ COMO 4.0 IGH / COMO 5.0 / COMO
5.0 IGH
SBC-C04 / SBC-C05 / SBC-C07
Compliance with all of the
relevant requirements of:
Machinery Directive (2006/42/EC) / Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility (EMC) Directive (2014/30/EU) / Electromagnetic
Compatibility Regulations 2016
Radio Equipment Directive (RED) (2014/53/EU)
Low Voltage Directive (LVD) (2014/35/EU)
The following harmonizing
norms were applied to the
product:
BS EN 15194:2017 Cycles – Electrically power assisted cycles – EPAC Bicycles
BS EN 60335-1 Household and similar electrical appliances - safety
BS EN 60335-2-29 Safety of household and similar appliances
Part 1: General requirements
Part 2: Particular requirements for battery chargers
Serial number:
Frame decal adhered to the back page of the user manual
UK technical
documentation by:
Leigh Smithers (Operations Manager)
Specialized UK Ltd, 65 Woodbridge Road, Guildford, Surrey, GU1 4RD
EU technical
documentation by:
Jan Talavasek (Sr. Director Turbo)
Specialized Europe GmbH, Werkstattgasse 10, 6330 Cham, Switzerland
Signature:
Jan Talavasek
(Sr. Director Turbo)
Specialized Europe GmbH, 6330 Cham, Switzerland, July 1st, 2021
NOTE: THIS DECLARATION OF CONFORMITY APPLIES ONLY TO BICYCLES SOLD IN COUNTRIES FOLLOWING THE
CE AND UKCA MARKING DIRECTIVES.
NOTE: IN ORDER TO CONNECT THE BICYCLE AND THIS USER MANUAL TOGETHER, THE YELLOW SERIAL NUMBER
DECAL LOCATED ON THE FRAME OF THE BICYCLE MUST BE PLACED OVER THE FACSIMILE OF THE DECAL ON THE
BACK PAGE OF THIS USER MANUAL.
To Next Page
Loading...
