TL H.264 DVR User’s Manual
26
Please note that the total normal PPS for all channels (for DVR-16TL) cannot
exceed 120 NTSC (720×240@120PPS) / 100 PAL (720×288@100PPS). To
increase one channel’s PPS, you may have to reduce others’ first. Event PPS
is not restricted to this rule, since a smart event scheduler will handle the total
PPS with a correct weighting.
3.5.4 Record Event Video Only
If the DVR shall start recording only when alarms are triggered, follow the
steps below:
• Enter the OSD setup menu with correct password.
• In the OSD setup menu, select <Record Setup> menu. Move the cursor to
the item <Preset Config>, and select <Event only>.
Refer to the section Preset Record Configuration
under Advanced
System Configuration for more detailed information.
To Next Page
Loading...
