Speco 4TL - Audio Output;Key Beep; Audio Output; Key Beep; Split Mode Audio

TL H.264 DVR User’s Manual
60
5.1.9 Audio Output/Key Beep
Enter this menu to setup the audio output or key beep.
Audio Output/Key Beep
1. Audio Output
2. Key Beep
3. Split Mode Audio
Live/PB
ON
OFF
5.1.9.1 Audio Output
This item is used to set the audio output mode. The available options are as
below.
<Live/PB>
Select this to play the recording sounds of live image in live mode, and
sounds of recorded video in playback mode respectively.
<Always Live>
Select this to play live sounds in both live mode and playback mode.
<OFF>
Select this to disable the audio output function.
5.1.9.2 Key Beep
This item is used to enable or disable the key tone. Select <ON> to enable
the key tone, or <OFF> to disable.
5.1.9.3 Split Mode Audio
This item allows users to select and output the audio of the selected channel
while viewing multiple channels. Select <CH1> through <CH16> to output the
preferred audio, or select <OFF> to disable audio output in multiple window
viewing modes.