Speco 4TL - Key Usage in OSD Setup Menu; Key Usage in Virtual Keyboard

TL H.264 DVR User’s Manual
42
Key Usage in OSD setup menu
<Direction Keys>
In the OSD setup menu, Direction keys are used to move the cursor to select
menu items. UP / DOWN are used to change the value in the selected field.
<ENTER>
In OSD setup menu or selection interface, press this key to select or save
settings.
<ESC>
Press to cancel or exit from certain OSD setup menu without saving any
changes.
Key Usage in Virtual Keyboard
A virtual keyboard shows is some setting items, such as camera title, e-mail
address, etc. The virtual keyboard displays as follows.
A B C D E F G H I J K L M
N OPQRSTUVWXYZ
a b c d e f g h i j k l m
n o p q r s t u v w x y z
0 123456789
.
!@
# − _,“+=*
◄ ► Backspace Delete
Cancel OK
<To input characters>
Move the cursor by pressing Direction keys and press ENTER to select
characters. Alternatively, press channel keys 1~9 to directly enter number 1~9,
press channel key 10 to directly enter number 0, or press “CALL” key to
directly enter a period mark “.”. The hot keys are for speeding up inputs of IP
addresses or etc.
<To move the cursor in title entry>
Select <◄ > / <► > and press ENTER, or press MODE and <◄ > / <►>
simultaneously to move the cursor to left / right in the title entry field.
<To delete previous character>
Select <Backspace> and press ENTER, or press DOME.