English
16
On the flowchart, each step is identified by a particular combination of LED states.
Whatever the step, normal operating mode is restored after 10 seconds of user
inactivity.
NOTE: Other actions are possible from the control panel. See Downloading Raw Data
Files to a USB Key on page 36 and Restoring Factory Settings on page 47.
Power Up
Normal
Operating Mode
Set Data
Logging
Set Radio
Press briey
Press briey
Press briey
Press for 2 sec.
Press for 2 sec.
(buzzer then beeps)
Press for 2 sec.
(buzzer then beeps)
Data logging is now on if it
was o, or o if it was on.
Receiver automatically returns
to normal operating mode.
Radio Mode
Radio port now
connected to receiver port A.
Turn o receiver to escape
from this mode.
Conventions used
for LED states:
O
On (solid color)
Very slow blinking
Slow blinking
Fast blinking
Conguration
Mode
Press briey
To Next Page
Loading...
