English
18
L-Band Rover
(Trimble RTX)
The SP60 is L-band ready (no firmware option needed),
which means it can receive corrections from a Trimble RTX
corrections service, via an L-band geostationary satellite,
provided you have subscribed to this service. With a currently
valid subscription, the SP60 will be able to compute and
deliver positions with the announced accuracy for the chosen
service, provided it is in line with the RTK option installed.
For more information about Trimble RTX corrections services,
refer to Trimble RTX Corrections Services on page 5 and
Technical Specifications on page 48.
NOTE: When using corrections from Trimble RTX services, be
aware that by default, position is computed:
• Directly in the local datum if you are using Survey Pro. The
computed coordinates are therefore very close to the
coordinates you would get in RTK.
• In ITRF2008 epoch 2005 if you are using FAST Survey
(but datum transformation is possible).
To Next Page
Loading...
