Spectra Precision SP60 GNSS - Technical Specifications; GNSS Characteristics

English
48
Technical
Specifications
GNSS Characteristics
• 240 GNSS channels
– GPS L1 C/A, L1P (Y), L2P (Y), L2C
– GLONASS L1 C/A, L2 C/A, L3
– BeiDou B1 (phase 2), B2
– Galileo E1, E5b
– QZSS L1 C/A, L2C, L1 SAIF
–SBAS L1 C/A
– L-Band
• Patented Z-Blade technology for optimal GNSS
performance:
– Full utilization of signals from all 6 GNSS systems
(GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS)
– Enhanced GNSS-centric algorithm: Fully independent
GNSS signal tracking and optimal data processing,
including GPS-only, GLONASS-only or BeiDou-only
solution (Autonomous to full RTK)
– Fast Search engine for quick acquisition and re-
acquisition of GNSS signals.
• Patented SBAS ranging for using SBAS code & carrier
observations and orbits in RTK processing
• Patented Strobe™ Correlator for reduced GNSS multi-
path
• Up to 10 Hz real-time raw data (code & carrier and
position output)
• Supported data formats: ATOM, CMR, CMR+, RTCM 2.1,
2.3, 3.1 and 3.2 (including MSM). In rover only: CMRx
and sCMRx.
• NMEA 0183 messages output
Real-Time Accuracy (RMS)
(1) (2)
SBAS (WAAS/EGNOS/MSAS/GAGAN):
• Horizontal: < 50 cm (1.64 ft)
• Vertical: < 85 cm (2.79 ft)
Real-Time DGPS Position:
• Horizontal: 25 cm (0.82 ft) + 1 ppm
• Vertical: 50 cm (1.64 ft) + 1 ppm
Real-Time Kinematic Position (RTK):
• Horizontal: 8 mm (0.026 ft) + 1 ppm