Spectra 1738 - Communication Settings; Reporting Formats and Identification; Account and Telephone Number Configuration

Spectra 1728/EX & 1738/EX - 14 - Programming Guide
COMMUNICATION SETTINGS
* UL Note: The installer is required to verify the complete compatibility of the DAC Receiver and formats at least once per
year.
Sect io n #
[140]* ___ / ___
TEL1 TEL2
REPORTING FO RMATS*
1 = ADEM CO SL OW (1400HZ, 1900HZ, 10BPS)
2 = SILENT KN IGH T FAST (1400HZ, 1900HZ, 20BPS)
3 = SE SCOA (2300HZ , 1800HZ, 20BPS)
4 = ADEM CO EX PRESS (DTMF 4+2)
5 = ADEMCO CONTACT ID (DEFAULT) ALSO, SEE OPTION [3 ] IN SECTION [136]
6 = PA GER FORMAT
If Hexadecimals (0 to FF) are used to program the report codes, verify that the pager also supports
Hexadecimals. If the pager does not support Hexadecimals, use only the digits 0 to 9.
[141] ___/___/___/___ PA NE L IDENTIFIER (WINLOAD SOFTWARE)
[142] ___/___/___/___ PC PAS SW ORD (WINLOAD SOFTW ARE)
[143] ___/___/___/___ PA RTITION ACCOUNT NUMBER 1 (For less than 4 digits, use the [FORCE] key to enter blanks.)
[144] ___/___/___/___ PA RTITION ACCOUNT NUMBER 2 (For less than 4 digits, use the [FORCE] key to enter blanks.)
[150] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
PC TEL EPHONE NUMBER FO R WIN LOAD SOFTWARE (32-digits, if less than 32 press [ENTER] to accept)
[151] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
CENTRAL STATION TELEPHONE OR PAGER NUMBER 1 (32-digits, if less than 32 press [ENTER] to accept)
[152] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
CENTRAL STATION TELEPHONE OR PAGER NUMBER 2 (32-digits, if less than 32 press [ENTER] to accept)
[153] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
BA CK UP TE LE PH O N E NU M BE R (32-digits, if less than 32 press [ENTER] to accept)
Special Keys for Telephone Numbers
[STAY] = * [MEM] = Switch from pulse to tone dialing or vice versa [FORCE] = D elete cu rrent di git
[BYP] = # [TBL] or [TRBL] = 4-second pause [PG] or [FN C 1] = Inserts Blank Space