Spectra 1738 - Programmable Output (PGM) Configuration; PGM Activation and Deactivation Events; PGM Event Group and Sub-Group Codes

Spectra 1728/EX & 1738/EX - 7 - Programming Guide
PROGRAMMABLE OUTPUTS
Each PGM Deactivation event can be used as another start (activation) event if their respective PGM timer (see sections
[066] to [068]) is programmed with a value other than 000.
Example: section [120] = 05 03 02: this means PGM1 will activate whenever partition 2 is Stay Armed.
Section #
Event Group # Sub-Group # Partition #
[120] PGM 1 PGM Activatio n Even t ___/___ ___/___ ___/___
[121] PGM 1 PGM Deactivation Event __ _/___ __ _/___ ___/___
[122] PGM 2 PGM Activation Event ___/___ ___/___ ___/___
[123] PGM 2 PGM Deactivati on Event __ _/___ __ _/___ ___/___
[124] Global PGM Activation Event ___/___ ___/___ ___/___
[125] Global PGM Deactivation Event
U sed to activate PGMs on
expansion modules & LCD keypads.
___/___ ___/___ ___/___
Event Group # Su b-Group #
00 = Zone OK 01 to 16 = Zones 1 to 16
99 = Any Zone
01 = Zone Open 01 to 16 = Zones 1 to 16
99 = Any Zone
02 = P art it io n Sta tus 00 = System not ready (Partition 1 only)
01 = System ready (Partition 1 only)
02 = Steady Alarm in Partition
03 = Pulsed Alarm in Partition
04 = Pulsed or Steady Alarm in Partition
05 = Alarm in Partition Restored
06 = Bell Squawk Activated (Partition 1 only)
07 = Bell Squawk Deactivated (Partition 1 only)
08 = Ground start (Partition 1 only)
09 = Disarm Partition
10 = Arm Partition
11 = Entry Delay (breach when system is armed)
99 = Any Sub-Group
05 = Non-Reportab le Events 00 = Telephone Line Trouble (Partition 1 only)
01 = [PG] or [FNC1] key was pressed (Partition 1 only).This
option can also be used to reset smoke detectors.
02 = Instant Arming
03 = Stay Arming
04 = For ce Armi ng
05 = Fast Exit (Force & Regular Only)
06 = PC Fail to Communicate (Partition 1 only)
07 = Midnight (Partition 1 only)
99 = Any Sub-Group (Partition 1 only, except 02 to 05 )
06 = Arm/Disarm with Remote Control 01 to 08 = Remote Controls 1 to 8
99 = Any Remote Control
07 = Button Pressed on Remote
(see button option “B” on page 24)
01 to 08 = Remote Controls 1 to 8
99 = Any Remote Control
08 = Button Pressed on Remote
(see button option “C” on page 24)
01 to 08 = Remote Controls 1 to 8
99 = Any Remote Control