EasyManua.ls Logo

Spectra 1738 - System Options Configuration

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Spectra 1728/EX & 1738/EX - 10 - Programming Guide
SYSTEM OPTIONS
Bold = Default Setting
* Reassign Zones to Expa nsion Inputs changes the zone numbering to increase the number of expansion inputs that can be
displayed on 10-Zone LED Keypads. Refer to 1728EX, 1728, 1738EX and 1738 Reference & Installation Manual for details.
SECTION [126]: General Options
Option
OFF ON
[1]
Confidential M ode N Disabled N Enabled
[2]
To Exit Confidential Mode N Enter Access Code N Press a Key
[3]
Confidential M ode Timer N 2 minutes N 5 seconds
[4]
PGM1 Normal State N Normally Open (N.O.) N Normally Closed (N.C.)
[5]
PGM2 Normal State N Normally Open (N.O.) N Normally Closed (N.C.)
[6]
Global PGM Normal State N Normally Open (N.O.) N Normally Closed (N.C.)
[7]
Reassign Keypad Zone 2 N Disabled N Enabled
[8]
Reassign Zones to Expansion Inputs*
(1728EX and 1728 only)
N Disabled N Enabled
SECTION [127]: General Options
Option
OFF ON
[1]
Partitioni ng N Disabled N Enabled
[2]
Access Code Length N 6-digits N 4-digits
[3]
Keypad Audible Trouble Warning N Disabled N Enabled
[4]
Lock System Master Code N Disabled N Enabled
[5]
Battery Charge Cu rrent (1 73 8EX and 1738 only) N 350mA N 700mA
[6]
User Code 048 is a Duress Code N Disabled N Enabled
[7]
Alarm Relay follows (1738EX and 1738 only) N Bell Output N Global PGM
[8]
Future Use N N/A N N/A
SECTION [128]: General Options
Option
OFF ON
[1]
Panic 1: Keys [1] & [3] N Disabled N Enabled
[2]
Panic 2: Keys [4] & [6] N Disabled N Enabled
[3]
Panic 3: Keys [7] & [9] N Disabled N Enabled
[4]
Panic 1: Silent or Audible N Silent N Audible
[5]
Panic 2: Silent or Audible N Silent N Audible
[6]
Panic 3: Silent or Fire N Silent N Fire
[7]
Keypad 1 Tamper Supervision N Disabled N Enabled
[8]
Keypad 2 Tamper Supervision N Disabled N Enabled
SECTION [129]: General Options
Option
OFF ON
[1]
PGM2 Output Activation Option N Steady N Pulse (flash)
[2]
PGM2 Pulse Once Every 30sec if System Armed N Disabled N Enabled
[3]
PGM2 Pulse On Arm, Twice On Disarm N Disabled N Enabled
[4]
ZX4 & ZX8 Zone Expansion Module Supervision N Disabled N Enabled
[5]
Wireless Module Supervision N Disabled N Enabled
[6]
Wireless Module Low Battery Supervision N Disabled N Enabled
[7]
4-Output Bus Module Supervision (APR3-PGM4) N Disabled N Enabled
[8]
Printer Module Supervision (APR3-PRT1) N Disabled N Enabled

Related product manuals