Spectralink 7520 and 7540 User Guide
14158600 Version 10.0
March, 2014 24
Chapter 5: Answering Calls
The handset must be subscribed and registered to answer a call.
When handset rings, display shows the icon for incoming calls and the caller information
appears below if supported by the subscribed system.
• Press to answer a call when your handset rings.
Auto Answer
When auto answer is turned on, the handset automatically goes off hook when an incoming call
arrives.
If subscribed to a wireless solution, the handset automatically goes on hook when calls are
terminated.
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Auto answer and press Select.
4 Scroll to On or Off and press Change.
Auto answer is inactive when the handset is charging.
Mute a Call
• Press Silence and the ring signal is muted.
Reject a Call
Reject a call is a system dependent feature. If supported by the subscribed system, do the
following.
• Press Reject to refuse the call. The rejected call is registered as a missed call.
Note
You can distinguish between an internal and external call by the ring
tone.This is a system dependant feature.
To Next Page
Loading...
