14226900-IG, Edition 10.0
July 2017, Original document
32
Call Hold
Call Hold is a system dependant feature. When an active call is on hold, the icon is shown in the
display.
Call Hold
1. To place an active call on hold, press R.
2. To retrieve the call, press R.
If handset is subscribed to a SIP IPBX, you can also do the following:
1. To place an active call on hold, press Options and press Select to select Hold.
2. To retrieve the call, press Resume.
Call Waiting
Call Waiting is a system dependant feature.
Call Waiting
l While on a call, press R to answer a second incoming call. The first call is automatically put on
hold.
l To reject a second incoming call, press left side of the navigation key for three seconds.
l
To disconnect the active call and return to the waiting call, press .
l
To end both calls, press twice.
l To swap between two calls, press R.
If handset is subscribed to a SIP IPBX, you can also do the following:
l While on a call, pressOK to answer a second incoming call. The first call is automatically put
on hold.
l To reject a second incoming call, press Reject.
l
To disconnect the active call and return to the waiting call, press .
l
To end both calls, press twice.
l To swap between two calls, press Options and select Swap calls or press R.
Spectralink 7522/7532 Handset User Guide
To Next Page
Loading...
