SpectraLink 7522 - Minimum Ring Time; Old DECT Servers; Deployment Level

14226900-IG, Edition 10.0
July 2017, Original document
84
4. Scroll to Time & date and press Select.
5. Scroll to Change date and press Select.
6. Scroll to desired date format and press Change.
7. Place cursor on the digit, you want to change by pressing the left or right side of the nav-
igation key.
8. Press a digit. The cursor will then automatically jump to the next digit.
9. Press Change.
Minimum Ring Time
It is possible to adjust the minimum length of the ringing tone. As default this setting is set to Off and
uses the default setting from the server.
Change Minimum Length of Ringing Tone
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Advanced and press Select.
4. Scroll to Minimum ring time and press Select.
5. Scroll to the desired option and press Change..
Old DECT Servers
It is possible to make your DECT handset compatible with older DECT servers.
Ensure Compatibility with Old DECT Servers
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Advanced and press Select.
4. Scroll to Old DECT servers and press Select.
5. To define compatibility with CS1K (CommunicationServer 1000), press Select.
6. Press Change to select between On or Off.
7. If the handset should send extended location information to the DECT server, scroll to Use
extend location and press Select.
l Press Change to select between No or Yes.
Deployment Level
You can define the deployment level to be either Normal, Weak or Bad. Normal is the standard and
default value. Contact your system administrator for more information.
Spectralink 7522/7532 Handset User Guide